IBC Water AS1029MP-CL, Инструкция по установке и эксплуатации

Страница: 10 / 55

AS1029MP-CL Page
10
Power outage
When electric power is interrupted the microprocessor will hold all relevant information in memory except for
the current time of day.
Current time of day
When power is restored the display will show zeros and will again register when the current time of day is
reset. If power is lost during a regeneration cycle the valve will remain operational in the current cycle and will
recommence electrically in that cycle when power is restored.
In long power outages it is advisable to check that the system is not in a regeneration cycle that could be
discharging water to drain and in this instance it would be advisable to place the valve in bypass mode until
power is restored.
General
Note: When changing valve operational cycles the valve control will emit a number of whirring sounds.
Note :- The valve cannot be positioned into the regeneration mode without ELECTRIC Power.
Note:- It is very important that on commissioning the tank and valve be completely vented of air .