IBA PQU-S, Руководство пользователя, Страница: 53 / 116

Manual
Issue 1.3
53
Basic settings
See PQU-
S module, “General” tab, chapter 10.2.1

Time base
Each submodule has its own time base. The default setting should not be changed.
Configuration
The “Configuration” section shows the characteristic value that is determined by this
module as well as the measurement interval. Here: Power frequency acc. to EN50160,
10 s
You can enable or disable all signals of this module in a dropdown menu.
“Analog” tab
Figure 24: EN50160 submodule: Power frequency
– “Analog” tab
Note
All “Analog” tabs display the signals calculated in the corresponding submodule. It is
not possible to delete signals or add new signals. However, the listed signals can be
enabled or disabled individually.

Name
The names are assigned by default. To allow an unambiguous identification, they
contain the input channel, the characteristic value and the measurement interval.
You can additionally assign two comments by clicking the icon in the signal
name field.

Function, input, unit
Displays the corresponding property

Active
Here you can enable or disable the signal.