IBA PQU-S, Руководство пользователя, Страница: 32 / 116

Manual ibaPQU-S
32
Issue 1.3
4. Right-click the connection (link) of the ibaFOB-io-D card to which the device is con-
nected.
5.
Select “Add module”. The list of available modules is displayed. Select “ibaPQU-S”.
Subsequently, the device is displayed in the module tree.
Hold the mouse button down and drag the device to the address (link 1
– 15 under
the device) set at the device with the S1 rotary switch:
Position 1
– F corresponds to address 1 – 15.
6.
Click “Read configuration from device” on the “General” tab.
The connected modules are detected automatically and displayed in the signal tree
7. The current and voltage inputs required for the measurement are configured in the
input modules (see chapter 8
“Measurement principles and measured quantities“).
8. Moreover, you can configure additional signals to be acquired as raw signals.