IBA PQU-S, Руководство пользователя, Страница: 40 / 116

Manual ibaPQU-S
40
Issue 1.3

Use name as prefix
If “True” is selected, the module name is prefixed to the signal names of this mod-
ule.
Connection

IP address
IP address or host name of the ibaPQU-S device (read only).

Auto enable/disable
If this option is enabled and ibaPDA cannot establish a connection to this device
when starting the measurement, it will disable this module and start the measure-
ment without the module. During the measurement it tries to restore the connection.
If this attempt is successful, the measurement is restarted automatically with the en-
abled module. If this option is not enabled, ibaPDA will not start the measurement if
it cannot establish a connection to the device.
Power grid

AC/DC
Select the grid type to be measured in the dropdown menu.

Power frequency
Select the power system frequency from the dropdown menu.

Default values: 50 Hz, 60 Hz
 When “custom” is enabled, you can enter a value between 10 Hz and 80 Hz.

Reference signal
Select one of the connected phases used as reference signal to synchronize the
sampling.
More functions

Read configuration from device
reads the configuration stored most recently from the device.
Click <OK> or <Apply> to apply the modified settings.