manualshive.com logo in svg

IBA PADU-8-M, Руководство пользователя, Страница: 10 / 39

Поделиться
Скачать
IBA PADU-8-M Скачать руководство пользователя страница 10

 

Manual ibaPADU-8-M

 

10 

Issue 1.9 

 

6 

Mounting and dismounting 

6.1 

Mounting 

1. 

Locate the DIN rail mounting clip on the rear side of the device. Place the device on 
the DIN rail so that the top part the mounting clip engages the top part of the rail 
appropriately.  

2. 

Slowly push down and in so that the bottom part of the mounting clips snaps onto 
the bottom part of the rail and firmly fixes the device to the DIN rail. 

3. 

Once fixed, connect the 24 V DC power supply to the termination shown on the de-
vice. Ensure that the polarity is correct prior to applying power. Finally, connect fi-
ber-optic cable to the TX/RX ports as shown on the device so that the fiber-optic 
ring is completed.  

6.2 

Dismounting 

1. 

Disconnect all external connections from the device.  

2. 

Grasp the device with one hand firmly on the top side. With your free hand, grasp 
the bottom of the device so that your index and middle fingers rest on the grounding 
screw.  

3. 

Lightly push down with the hand on the top side of the device and simultaneously 
pull forward with your other hand. With this action, the device should free itself from 
the DIN rail. 

 

Содержание PADU-8-M








































Отзывы:

Нет отзывов