IBA ibaPADU-S-IT-16, Руководство пользователя

Страница: 49 / 80

ibaPADU-S-IT-16 Manual
Issue 1.10 49
BufferFillCount Counter, when buffer is filled
BufferOverrun Counter for Buffer-overrun
Additional output signals for buffered access
BufferSize Buffersize
SubSampling Subsampling of the signals
Signal Settings for FiberOptics_IO module (FO interface)
Figure 37: FO interface in the hardware configuration
In the FiberOptics_IO module, you can define which FO transfer protocol ibaPADU-S-IT-16
uses for receiving and sending data. It depends on the FO protocol of the modules, which
link protocol is needed. If combined with ibaPDA,
“External“ must be chosen. In this case,
the FiberOptics_IO module of ibaPADU-S-IT-16 is displayed as virtual ibaPADU-S module
in ibaPDA. This is also the default setting.
If “External“ is chosen as setting for the input,
“External“ is also the only option that can be chosen as setting for the output. This is the
only possible combination.
Without ibaPDA, the 3.3Mbit and 32Mbit protocols can be combined in any way for input
and output.
The “32Mbit Col” protocol is only required when an ibaBM-COL-8i-o device is used at the
FO input.
The 32Mbit Flex setting does not have a function, yet, and cannot be chosen.
In the Signal Type field, you can define the signal type and the number of signals. When
this setting has been applied, (with <Apply>), you see the signals in the signal tree on the