IBA ibaPADU-S-IT-16, Руководство пользователя

Страница: 42 / 80

Manual ibaPADU-S-IT-16
42
Issue 1.10
10.2 Update via ibaPDA

Open the ibaPDA I/O Manager and choose the PADU-S module in the tree struc-
ture.

On the
“Diagnostics“ tab, click on the <Write firmware> button and choose the
“padusit_v[xx.yy.zzz].iba“ update file.

You start the update by clicking on <OK>
Figure 29: Update via ibaPDA
10.3 Updating the modules
After having mounted the modules and applied the voltage to the central unit, ibaPADU-S-
IT-16 detects the modules and checks the software version.
ibaPADU-S-IT-16 has a so called
“overall release version“. This version contains the cur-
rent software version of the central unit as well as the software versions of the modules.
You can find the
“overall release version“ on the ibaPADU-S-IT-16 Website on the „firm-
ware“ tab, see chapter 9.4.2.2, “firmware“ tab”.
When the software version of a module does not match the
“overall release version“ of the
central unit, ibaPADU-S-IT-16 does an automatic up- or downgrade of the module. There-
after, the module is ready to be used.
Important note
After the update, ibaPADU-S-IT-16 reboots. This can take up to 5 minutes.
As soon as the green system LED L1 is flashing regularly and none of the LEDs L5
… L8
is on, the device can be used again.
Important note
The
“overall release version“ contains all modules developed up to the date of release of
this firmware and the corresponding software versions. If a module cannot be detected,
yet (i.e. it is more recent than the Firmware version of the CPU), this module is ignored
and outlined in red on the Web interface.
In this case, a new update file has to be installed for the
“overall release version“. If you
want to get the current update file, please contact the iba Support. You will also find it on
the
“ibaPADU-S Modular“ CD-ROM, included in delivery of the module.