IBA ibaPADU-S-IT-16, Руководство пользователя

Страница: 38 / 80

Manual ibaPADU-S-IT-16
38
Issue 1.10
9.4.2.5
„network“ tab
On this tab, you can make as administrator changes in the network settings.
Figure 24:
“network“ tab
You can adapt all network settings.

WINS Devicename
Here, you find the default host name. With this host name, you can access the device in
the Webbrowser. You can also give meaningful names from a technological point of view
that have some relation to the installation or the process. Click on the <change name> but-
ton, for applying the name you have entered.

Enable DHCP
When there is a DHCP server in the network, you can activate DHCP by ticking the box.
When the device registers in the network, it gets automatically an IP address.

IP Address, Subnet Mask, Default Gateway
If you want to assign a fixed network address to the device, please ask the network admi-
nistrator for these parameters and enter them. For applying the changed network settings,
please click on the <submit> button. If you have made a mistake when typing the address,
please click on the <reset entries> button. The settings are reset to the last valid version.

Fiberoptic
Here, the fixed IP address is shown, the FO connection addresses the device with. This
address cannot be changed.

Server settings
Here, it is possible to enable or disable the access to the device via FTP or Telnet by tick-
ing the box. In the default setting, the access via FTP and/or Telnet is enabled. If you
change the setting, the new setting is only applied by a click on the <set> button. This
function is available with firmware version v02.05.002 or higher.