Manual
ibaBM-DPM-S-64
50
Issue 2.5
The function in area
permits the update of firmware. Firmware updates will be re-
leased by iba AG when they are recommended due to technical development or im-
provement.
The area
„Active simulation mode“ is a future expansion for ibaBM-DPM-S and has
no function for ibaBM-DPM-S-64.
Update:
After you have received a firmware update from iba AG select the update file from the
dialog box “browse” on the administrator’s page. Usually, it is a file with extension
“.CAB”. The filename may be, for example, “update.SH4.CAB”.
Click on the <submit> button in order to load the update. The file will then be down-
loaded into the device, unpacked and installed.
Note
The installation may take several minutes. Don’t switch off the device in this time be-
cause this would interrupt the update process.
10.1.5
Time Function
On the
“Time” page, you can define the system time. After having entered the time pa-
rameters, you can transfer the current time to the device by clicking on the <submit>
button.
Figure 12:
Web interface
– Time function
