IAI ROBO CYLINDER RCM-P, Руководство по эксплуатации

Страница: 26 / 68

18
(2) RCP, RCS, E-Con, RCP2, ERC
As the table below shows, in the position table, there are 7 setting contents (Position, Vel, Acc/Dcl, Push,
Range, Acc only MAX, and ABS/INC) per each position data number.
No. Position Vel Acc/Dcl Push Range Acc only MAX ABS/INC
0 * * mm/s * G * % * mm * 0
1 * * mm/s * G * % * mm * 0
2 * * mm/s * G * % * mm * 0
3 * * mm/s * G * % * mm * 0
4 * * mm/s * G * % * mm * 0
5 * * mm/s * G * % * mm * 0
6 * * mm/s * G * % * mm * 0
7 * * mm/s * G * % * mm * 0
8 * * mm/s * G * % * mm * 0
9 * * mm/s * G * % * mm * 0
10 * * mm/s * G * % * mm * 0
11 * * mm/s * G * % * mm * 0
12 * * mm/s * G * % * mm * 0
13 * * mm/s * G * % * mm * 0
14 * * mm/s * G * % * mm * 0
15 * * mm/s * G * % * mm * 0
Position Data Table
Use either the key or the key to execute the transfer of the contents. Use either of the keys for
position number changes. In the display screen, only the single content of one position number will be
displayed.
The numbers following “No.” indicate the position number.
The numbers following “A” indicate
the axis number.
Indicates the following:
A: ABS (Absolute Coordinate Assign)
I: INC (Relative Coordinate Assign)
MDI No. 000 A. 00
Pos A ＊