manualshive.com logo in svg

IAI ELECYLINDER EC GD3, Операция, Страница: 20 / 32

Поделиться
Скачать
IAI ELECYLINDER EC GD3 Скачать руководство пользователя страница 20

EleCylinder Series

  Options

 

RCON-EC connection specification

Description

Model

ACR

Select when connecting to a field network via an R-unit (connected to RCON-EC).
*This usage involves direct connection to RCON-EC. When using wireless communication, separately prepare an interface box,

  interface box conversion cable, and power / I/O cable connector. 

Applicable models

All models

Brake

Description

Model

B

This mechanism stops the slider, rod, or table from moving when the power or servo is turned off. 
When mounting the actuator vertically, this option is required.

Applicable models

All models

PN specification 

*Cannot be selected simultaneously with the ACR option

Description

Model

PN

For I/O specification, NPN is the standard specification.
Specifying this option changes input/output to the PNP specification.

Applicable models

All models

Non-motor end specification

Description

Model

NM

The home position is normally set to the motor side. This option is for setting the home position on the other side in order to

 

accommodate variations in equipment layout, etc.

Applicable models

All models

Cable exit direction

Description

Model

Applicable models

All models

CJB/CJL/CJR/CJT

The mounting direction of the actuator cable mounted on the actuator body can be changed among top, bottom, left, and right.

Bottom: CJB

Left: CJL

Right: CJR

Top: CJT

Split motor and controller power supply specification  

* Cannot be selected with the ACR option (the RCON-EC connection specification is a split motor and controller power supply specification)

Description

Model

TMD2

This option provides a separate motor power supply and control power supply. Select to allow shutting down the actuator drive power only.
Please refer to P. 26 for more information on wiring.

Applicable models

All models

Wireless axis operation support specification 

*Cannot be selected simultaneously with the ACR option

Description

Model

WL2

Specifying WL2 allows for the product to operate wirelessly as with WL (start point, end point, and AVD adjustment), and to also perform axis travel 
operation tests (forward end/backward end movement, jog, and inching). However, this function is not meant to perform automatic operation. 
Refer to P. 118 of the EleCylinder Catalog V10 for precautions on axis operations using a wireless connection.
(Note) Customers cannot change WL to WL2, or WL2 to WL. Please contact IAI for this. When using wireless communication with RCON-EC

             connection, separately prepare an interface box, conversion cable, and power / I/O cable connector.

Applicable models

All models

Wireless communication specification 

*Cannot be selected simultaneously with the ACR option

Description

Model

WL

This option enables support for wireless communication. Specifying this option enables wireless communication with the TB-03 teaching pendant.
The start point, end point, and AVD can be adjusted via wireless communication.
When using wireless communication with RCON-EC connection, separately prepare an interface box, conversion cable, and power / I/O cable connector.

Applicable models

All models

19

Содержание ELECYLINDER EC GD3

































Отзывы:

Нет отзывов