IACDRIVE I5300 Series, Руководство пользователя, Страница: 204 / 272

Description of Function Codes
I5300 User Manual
- 204 -
F unction Code Parameter Name Setting Range Default
P 9-49
F ault protection
action selection 3
Unit's digit (User-de fi ned fault 1, Err27)
00000
Same as unit's digit in P 9-47
Ten's digit (User-de fi ned fault 2, Err28)
Same as unit's digit in P 9-47
Hundred's digit (Accumulative power-on time
reached, Err29)
Same as unit's digit in
P 9-47
Thousand's digit (Load becoming 0, Err30)
0: Coast to stop
1: Stop according to the stop mode
2: Continue to run at 7% of rated motor frequency
and resume to the set frequency if the load
recovers
Ten thousand's digit (PID feedback lost during
running, Err31)
Same as unit's digit in
P 9-47
P 9-50
F ault protection
action selection 4
Unit's digit (Too large speed deviation, Err42)
00000
Same as unit's digit in P 9-47
Ten's digit (Motor over-speed, Err43)
Same as unit's digit in
P 9-47
Hundred's digit (Initial position fault, Err51)
Same as unit's digit in
P 9-47
Thousand's digit (Speed feedback fault, Err52)
Same as unit's digit in
P 9-47
Ten thousand's digit: Reserved
If "Coast to stop" is selected, the AC drive displays Err** and directly stops.
• If "Stop according to the stop mode" is selected, the AC drive displays A** and stops
according to the stop mode. After stop, the AC drive displays Err**.
• If "Continue to run" is selected, the AC drive continues to run and displays A**. The
running frequency is set in P9-54.
F unction Code Parameter Name Setting Range Default
P 9-54
F requency selection
for continuing to run
upon fault
0: Current running frequency
1: Set frequency
2:
F requency upper limit
3: F requency lower limit
4: B ackup frequency upon abnormality
0
P 9-55
B ackup frequency
upon abnormality
0.0%–100.0% (maximum frequency) 100.0%