7
Rev. 141120
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd
• Reset: use an appropriate tool to press the button to reset the camera (Hold
for 5 seconds to reboot the camera. Hold longer than 5 seconds to load default
settings)
4.3 Ceiling mount and Wall mount Installation
1. Adhere the “Guide Pattern Sticker” to the desired location on the mounting
surface and mark hole positions.
2. Drill 4 mounting holes and 1 cable entry hole on the mounting surface according
to the guide sticker.
3. Secure the metal plate to the ceiling using the appropriate screws.
Use machine type screws if you are attaching the camera to a pendant mount.
Use tapping type screws for all other surfaces.
4. For cement surfaces, insert the Plastic Anchors into the holes. For softer sur-
faces, do not use the Plastic anchors.
5. Use the Rubber Feet for surface mounting.
Tapping
Type
Screws
Plastic
Anchors
