24
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd
Rev. 141120
In this section, you can configure basic camera system settings.
•
Time Stamp: Select
Yes
to enable
Date and Time Stamp
to display the date
and time on the camera feed. Select
No
to hide it.
•
Current Date & Time: Displays the camera’s current date and time
•
New Date & Time: You may choose to...
»
Set the Date and Time
Manually
»
Synchronize Date & Time with
Computer Time
or
»
Synchronize Date & Time with
NTP Server
. NTP Server and Time Zone
can be configured in the Communication Setup tab.
See section 6.3 for
details.
•
Date formats include: YYYY/MM/DD, MM/DD/YYYY and DD/MM/YYYY.
System Information:
This section contains information on the Camera’s Kernel, BIOS version and App
(firmware) version.
Update:
All Annexxus-series cameras are sold with the most recent version of the firmware
already installed. If in the future firmware updates are released, you can update your
camera’s firmware by first downloading the firmware file from i3 International’s
website or FTP site. After downloading firmware file, click the
Browse...
button
in the camera’s System setup tab and locate the new firmware file. Then click the
Update
button and wait while the firmware is being updated on your camera.
Note:
Be sure to stop all camera operations prior to an update. Do not turn off
power or disconnect from the network during the process.
Click
Restart
Camera after you have updated firmware successfully.
Restart/Reset:
•
Click
Restart Camera
to restart your Annexxus-series camera. This will
cause a temporary disconnect, no video will be recorded while the camera is
restarting but all custom settings will be saved. Camera restart is required after
the firmware update. After clicking, a pop up will appear asking you to confirm.
Click
Yes
.
•
Click
Factory Reset
to return all settings, except for the Networking (IP)
settings to factory defaults. After clicking, a pop up will appear asking you to
confirm. Click
Yes
.
