10
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd
Rev. 141120
5. Connecting your IP Camera to the SRX-Pro Server
5.2 Camera Connection Options
5.3 Hardware/Software Requirements
The following requirements must be met to achieve a successful network connection
with the Ax49/Ax50/Ax51 IP camera.
SRX-Pro Server:
• i3 SRX-Pro Version 2.0 or higher
• Windows XP, XPe or 7 Pro or 7e
• Internet Explorer Version 6.0 or later
• CPU: Intel Pentium Core 2 or higher
• Memory: 1GB or more
• VGA card--supporting Direct X 9.0 or above
Power Supply
Your camera requires a DC12V/AC24V/PoE power supply. Make sure to use the
correct power supply before connecting to this network camera. Use a RJ45
network connector to connect the camera to your computer or hub switch.
Remember, If PoE (Power over Ethernet) connector is used, an electrical cable is not
required
