i2Systems Gen3 V3285, Руководство по установке

Страница: 15 / 20

www.i2systems.com
Integrated Illumination Systems, Inc.
355 Bantam Lake Road
Morris, CT 06763 USA
tel +1.860.567.0708
fax +1.860.567.2501
sales@i2systems.com Product information is subject to change without notice.
All brand names and product names are trademarks of i2Systems.
© 2012 i2Systems. All Rights Reserved.
Gen3
Installation Guide
Gen3
Gen3
Gen3
24V DC
Hardwire Fixture includes
6-foot Cable installed
RED
BLK
WHT
GRN
16 AWG
recommended
PS24V75W-E05P / PW
HOT
NEUTRAL
120-277V AC FEED
GRN/YEL
For No Dimming Installations, cut and
cap green and white dim wires using
standard industry practices.
Alternatively, tie the Dim wires
together as shown to enable turn-on
Synchronization as detailed below.
100W, UL-Listed Class 2
Power Supply
Synchronizing Fixtures
The Gen3 Fixtures are “smart” fixtures that synchronize and start simultaneously when power is applied to one
or more Power Boxes. For dimming installations, this feature is enabled automatically. However, for non-dimming
installations, you can enable this feature by tying all white wires (Dim+), then repeating this step for the green wires
(Dim-). You do not need to connect these wires to the Power Box unless you want to synchronize multiple Power Boxes,
which you can do by using i2Systems Dimming Cables and linking Power Boxes together (no dimmer is necessary).
Installation: 100% Intensity, No Dimming, Hardwire
14