i-therm AI-7482D, Руководство пользователя

Страница: 7 / 10

i
7
OIM AI-7X82D V2.1 Page 7 of 10
Default USER LOCK CODE is 15 to access Control & Configuration List.
User has a choice to set its own USER LOCK CODE between 1 to 9999, this is to
prevent unauthorized access of Control & Configuration List.
USER
LOCK
CODE
15
PARA
METER UPPER
DISPLAY LOWER
DISPLAY
DEFAULT DESCRIPTION
TABLE 3 :
Below listed options will appear only if OP2 is selected as an Auxiliary Control Mode .
User can select Heat logic for control Output 2 in which OP2 will remain ON till
PV<SP2 (PV increases when output is ON).
User can select Cool logic for control Output 2 in which OP2 will remain ON till
PV> SP2 (PV decreases when output is ON).
If selected, User can set SP2 value independently, irrespective of SP1.
In this mode SP2 is always related with SP1.
User can set SP2 value with deviation of ± 99°C w.r.t SP1.
If Enabled, User can View & edit the Set point (SP2) in USER list.
If disabled, User can not View or edit Set Point (SP2) in USER list.
OUTPUT 2
LOGIC
SET
POINT
2
SET
POINT
2
ABS
Heat
Enable
DESCRIPTION
UPPER
DISPLAY LOWER
DISPLAY
DEFAULT
PARA
METER
AI-7682D