HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO LAPTOP / TABLET)
1)
Turn on the laptop / tablet and connect the power adapter to the docking station.
2)
Connect the docking station power adapter to the AC 110 V / 230 V network and press the ON
button.
3)
Connect the USB-C cable to the USB-C port on the back panel of the docking station. For connection
to a USB-A port of your laptop / tablet, please use an adapter of USB-C to USB-A.
4)
Connect the other end to the free USB 3.0 / USB-C port of your laptop / tablet.
5)
Subsequently, the automatic installation of ports in each system starts.
6)
After the installation is complete, restart the laptop / tablet.
In Windows, the LAN port appears in Start → Control Panel (Show Small Icons) → Device Manager →
Network Adapters as “
USB Ethernet
”. The docking station appears in Start → Control Panel (Show Small
Icons) → Device Manager → Graphic Adapters as
“ USB-C Triple-4K Dock ”
.
Audio ports
can be found
in Start → Control Panel (Show Small Icons) → Device Manager → Audio, Video and Game Controllers as
“
USB Audio
“.
Displaying LAN, display and audio ports in Device Manager
If any of these devices are marked with yellow ! or ?, then the docking station is not installed correctly. In
this case, disconnect the docking station, uninstall the existing drivers (see chapter “Uninstalling Drivers”),
and reinstall the latest drivers available on our website www.i-tec-europe.eu on the "Download" tab of this
product. Then reconnect the docking station to the laptop / tablet. In case of problems, please contact our
technical support: [email protected].
DRIVER INSTALLATION IN MAC OS X
ATTENTION! Do not connect the dock to your Mac until you install the appropriate drivers. Drivers must only
be installed before first use. We recommend that you have the latest MacOS operating system installed.
Download drivers from our website www.i-tec-europe.eu on the “Download” tab of this product
and run
the installation:
Unpack the file on your MacBook desktop as a virtual disk, select “Drivers” and then “DisplayLink Software
Installer”. Then select the installation language and follow the on-screen instructions, enter the user
password if necessary. The screen may blink while the drivers are being installed, this is a standard process.
After the installation is complete, restart the MacBook.
