I.R.I.S. IRISPowerscan 9.5, Руководство пользователя

Страница: 39 / 182

IRISPowerscan
TM
– User Guide
31
1. Create a project based on the chosen template
You must create your own project, rather than change the
template itself. By doing so, the template will still be used as
such. Your project will have its own name and configuration.
See: Starting up, Creating a project.
2. Refine the project settings in the Project Setup
Once your project is created, you can make tests with your own
documents, then refine the project settings in the Project Setup
window. See: Project Setup.
3. Check the default scanning parameters
Before you start scanning, you must carefully check the scanning
parameters. This is done in the Page Setup window. See:
Scanning, Page Setup.
4. Launch the scanning
You can then launch the scanning: put your documents in the
scanner paper feeder and launch the scanning. See: Scanning,
Scanning operations.
5. Carry out index validation (if required)
If the application has been set to index your documents, the
index values are ready for validation just after the scanning is
complete. The operator can check and possibly correct the index
fields in the Index pane. See: Index validation.
6. Carry out post-processing operations (if required)
Once scanned, the documents are appear in the explorer and their
corresponding images are displayed in the viewer. If necessary,
the operator can act on the explorer, as well as carry out post-
processing operations such as: rotation, cropping, adjustment,
etc. See: Post-scanning operations.
7. Process your documents
Once all the required processing steps have been completed on
the images, these are ready for the output processing. Refer to
the section on Output processing.