ISH & ISHV & ISHVS CONNECTOR Instruction Manual
Document No.
HDM-0002
24
/
29
Confidential C
9. Mating of connector
①
Push the female connector that has been inestalled the secondary lock part and the retainer in the direction of
mating until makes an audible click(see Fig.50).
While mating the female connector,please do not touch the lock arm to prevent insufficient mating.
②
After that, pull the female connector lightly to check that the female connector is locked.
Notes
①
Only mate the connector in the direction instructed above. Do not forcefully mate in any orientation shown in Fig.51.
Doing so may cause damage or deformation to connectors.
②
If there is any damage or deformation, do not use the damaged item.
Replace the item with a new one.
Fig50. Direction of mating
Direction of mating
Direction of mating
Fig 51. Mating orientations (not advisable)
Lock arm
Lock arm
