-
in the section “Device Setup” click on “Add..”.
-
in the dropdown menu first select “Import TSI..” then “Import Other..”.
-
select the file containing the mappings.
-
at the end of the importation make sure that in the section “Device Setup” the ports “In-Port & Out-Port”
are set up on “All Ports”.
2.2
MIXER connection.
SX-I can work with both MONO signals in one channel and STEREO signal in two channels. The
attenuation’s configuration to use is
-10db
. In the following diagram is shown an example of standard
configuration with SEND / RETURN from mixer to SX-I.
Page of
4
21