If you set up the midi channel nr.9, the item “Midi Ch. DJ-I - External.” will appear on the display.
In this modality, the SX-I receives midi CC signals for the regulation via external controller of the GLOBAL
section (see point 4.0), both in input and output. The channel midi 9 cc 70 corresponds to the D/W, the cc 71
corresponds to the Reverb, the cc 72 to the Delay, the cc 73 to the Filter. The editing of the GLOBAL
parameters remains in effect in each menu, both effects and synth and the Drums & Synth synthesis is
commanded only by the midi notes received on the cannel nr. 1.
In this configuration the TAP-TIME of the delay effects will be synchronized to the midi clock received.
It is a specific function for the controller i-nstrumens DJ-I but it is compatible with each midi controller that
uses channels and cc mentioned above
25.2
Activation Controller
To activate or deactivate the Controller’s function exclusive of all the potentiometers, encoders and switch of
the SX-I, it is necessary to keep pressed for more than 3 seconds the encoder placed on the right of the
display. When the activation is done, on the display, near the midi channel, it will appear a “!” (exclamation
point). Standard mappings for Traktor’s use are configurable following the direction explained in the point 2.0
Installation.
26.0
BATTERY
(Tabletop Version Only).
When the level of the battery is not sufficient, it will start to blink the battery’s symbol with the item “Low” on
the display. The SX-I autonomy is approximately of 20 hours of functioning; the recharge should be done
through a USB connection (from a computer or from a charger) and it needs 8 hours to be completed. In the
case of inactivity longer than 45 minutes, the SX-I will automatically go in standby. To go back to the
utilization, it is necessary to turn off the battery button and to disconnect the USB cable.
ATTENTION: To recharge the SX-I when connected to the power supply, the battery button should be
set up on “I”.
Page
of
20
21
