4.
Jack 6.3 mm AUDIO LINE IN
(Stereo).
5.
Jack 6.3 mm AUDIO LINE OUT
(Stereo).
6.
Battery Button I.O.
It activates or deactivates only the battery, so if used through supply or USB
connection, the SX-I will turn on also if the button is set to “O”. Set to “I” to recharge the battery when the
USB is connected.
1.2
SPECIFICATIONS
Effector: Delay (Max 6000ms), Reverb (Max 10sec), Granular, Bitcrusher, LFO, Flanger, Filters, Compressor,
Phaser, Cubed special effect.
Synthesizer: White Noise, Pink Noise, Drums, 3 x VCO, FM / AM Modulation, VCF, Envelope.
AUDIO
Sensibility AUDIO LINE LEVEL:
3.12 Volts p-p (in)
3.16 Volts p-p (out).
-10db
Connection JACK 6,3 mm stereo.
MIDI
Midi Electrical Specification 1.1 (2014) - 3.3 volt signaling.
Connection JACK 3,5 mm a 3 pin Tabletop
DIN 1u Rack Module Version
2.0
INSTALLATION.
SX-I is compatible with all the OSX and MacOS versions that support the MIDI device Class Compliant and
with Microsoft Windows 7 and later. It doesn’t need driver installation.
The MIDI mappings compatible with the use in the function “Controller” for NI Traktor Pro and Traktor Scratch
Pro are available on www.i-nstruments.com
2.1
Mapping importation for the use in NI Traktor:
-
make sure that SX-I is connected through USB
-
open NI Traktor.
-
click on “Preference Button” top right.
-
click on “Controller Manager”.
Page of
3
21
