COBALT Pro
™
Wall Sensor Retrofit Kit for
Exposed Flush Valve Installation Instructions
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
Part No. 101675
page 2
Rev 080323
ELECTRICAL BOX INSTALLATION
Step 1
Install 2-gang electrical box (4” x 4” x 2-1/2”). The location will
vary based on the rough-in. Refer to the rough-in drawings for
specific mounting location. Use a GFCI plaster ring.
4X4 JUNCTION
BOX
GFCI PLASTER RING
I-CON IR PLATE
AN I-CON IR PLATE MOUNTS TO
GFCI JUNCTION BOX COVERS
EXISTING COMPONENT REMOVAL
Step 1
Remove control stop cap.
Step 2
Turn adjustment screw
CLOCKWISE
to close control stop.
Step 3
Activate flush valve to relieve water pressure.
Step 4
Use strap wrench to remove flush valve cap. Remove actuator
assembly and all inner components. Inner components commonly
include a diaphragm, trip mechanism, and plastic internal cap.
