COBALT Pro
™
Wall Sensor Retrofit Kit for
Exposed Flush Valve Installation Instructions
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
Part No. 101675
page 4
Rev 080323
Step 2
Feed control module cable through junction box knock-out.
Attach control module to junction box with provided screws.
Step 3
Reattach and secure cover with set screw.
WALL SENSOR INSTALLATION - INSTALLATION
WITHOUT ELECTRICAL BOX
Step 1
Drill 1-1/2” hole through wall. The location will vary based on the
existing flush valve installation. Typically installed 21” about the
fixture on the centerline.
Step 2
Drill openings for wall anchors using 3/16” drill. See dimensional
drawing. Insert wall anchors.
3
16 "
5
3
16 "
5
1 12 "
38
1 58 "
41
1 58 "
41
3 14 "
83
COMMERCIAL CUTSHEET
TO CHANGE
ANNOTATION SHOULD BE \\i-consystems.int\Operations\CAD Drawings\TEMPLATES\ANSI-CUTSHEET-TEMPLATE.sldstd
•
SET NORMAL LINE THICKNESS TO .004
•
SET THIN LINE THICKNESS TO .002
•
ADJUST SHEET SCALE TO FILL PAGE
•
SET FRACTIONAL DISPLAY TO VERTICAL
•
SET BENT LEADER LENGTH TO 0.1" IN ANNOTATION AND DIMENSIONING
•
TEXT SHOULD BE ALL CAPS
•
DUAL DIMENSION MEASUREMENT (MILLIMETER) SHOULD MATCH THE FRACTIONAL DISPLAY (INCHES)
•
TEMPLATE INFORMATION
PAGE SIZE 3"x3"
•
CENTURY GOTHIC SIZE 8 FONT
•
ONE-TIME SYSTEM SETTING CHANGE
DIMENSIONS NON-IMPORTED (DRIVEN) AND DIMENSIONS (DANGLING) SET TO BLACK
•
SKETCH (INACTIVE) AND SKETCH (UNDEFINED) SET TO BLACK
•
SET PDF EXPORT LINES AND SHADED EDGES TO HIGH QUALITY
•
SET PDF EXPORT SHADED/DRAFT GEOMETRY AND SHARPENED OLE DPI TO 600
•
PARAMETERS TO MEET
INDICATE A CENTERLINE OF FIXTURE
•
INDICATE A CENTERLINE OF SUPPLY FOR CONCEALED SYSTEMS
•
INDICATE A CENTERLINE OF WALL SENSOR WHEN APPLICABLE
•
