COBALT Pro
™
Wall Sensor Retrofit Kit for
Exposed Flush Valve Installation Instructions
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
Part No. 101675
page 9
Rev 080323
PROGRAMMING QUICK REFERENCE
When adjustment LEDs are illuminated, their corresponding values appear on the display. Make adjustments as necessary.
See standard operations guide for more information.
Range
adjusts the maximum range used to detect a user. The range can be adjusted from 6-54 inches.
Exit
adjusts the amount of time an object must not be detected before the valve considers the user to have exited.
The range can be adjusted from 0-15 seconds.
Run
adjusts the water volume savings in percent.
Redetect
adjusts the amount of time a user must be out of range before another user can be detected.
The range can be adjusted from 0-60 seconds.
CARE OF CHROME PLATED SURFACES
DO NOT use commercial cleaning compounds to clean flush valve. Abrasive or chemical cleaners may dull luster and attack finishes.
Use mild soap and water and then dry with a clean nonabrasive cloth or towel. A microfiber cloth is recommended. Protect flush
valve from any splattering when cleaning the floor, tile, or fixtures. DO NOT USE ACID OR ALCOHOL BASED CLEANERS.
