manualshive.com logo in svg

I-bus/Phoenix G8, Руководство пользователя

Поделиться
Скачать
I-bus/Phoenix G8 Скачать руководство пользователя страница 24

4-2

G8 CPCI Enclosure User’s Guide

Chapter 4 - Drive Bay

7.

Engage the injector/ejector handles by pressing them towards each
other.

8.

Secure the drive module by tightening the two front panel screws.

9.

Turn on the main system power.

Removing/installing the hard drive in the drive module

1.

Remove the drive module from the chassis.

2.

Remove the two screws securing the CD-ROM drive bracket to the
hard drive/floppy drive bracket (on the CD-ROM side of the bracket,
at the rear edge).

3.

Remove the three screws securing the hard drive and floppy drive
bracket to the front panel.

4.

Before physically separating the hard drive/floppy drive bracket from
the module, unplug the power and signal cables from the hard drive
and floppy drive.

5.

Remove the four screws that mount the hard drive to the bracket, tak-
ing care not to lose any of the eight nylon shoulder washers. 

Note: 

These washers isolate the hard drive case from chassis ground.

If they are not replaced in their proper positions, EMI/RFI integri-
ty may be compromised.

6.

Remove the hard drive.

7.  Place a new hard drive on the bracket after first placing four shoulder

washers in the drive mounting holes, with the flat washer-side toward
the hard drive.

8.

Place the other four shoulder washers in the drive mounting holes,
with the flat washer-side toward the mounting screw head. 

9.

Secure the hard drive with the four screws removed in step 5.

10. Re-plug the power and data cables to the hard drive and the

floppy drive.  

11. Secure the hard drive/floppy drive bracket to the drive module front

panel using the three screws removed in step 3.

12.  Secure the hard drive/floppy drive bracket to the CD-ROM bracket

using the two screws removed in step 2.

13. Place the drive module back into the chassis.  

14. Secure it by tightening the captive screws.

Содержание G8

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды