Hyundai N5000 страница 6 Скачать руководство пользователя

Страница: 6 / 76

Chapter1. General Descrip

Chapter1. General Descriptions

tions

N5000 INSTRUCTION MANUAL

Chapter 1. General Descriptions

1.1 Instruction manual

• The following instruction manual is that of N5000 Inverter made by Hyundai Heavy

Industries Co., LTD. Please read the following direction carefully and completely before

operating an inverter. Atrer reading this manual, keep it to hand for future reference.

1.2 Warranties on Product

• Warranties on this product are based on the time of contract on the supply. However within

the warranty period, the warranty will be void if the fault is due to;

(1) Incorrect use as directed in this manual or attempted repair by unauthorized personnel.

(2) In the case that the reason of fault is out of the inverter.

(3) Using the unit beyond the limits of the specification.

(4) Natural disaster (earthquake, thunderstorm etc…)

• The warranty is for inverter only, any damage caused to other equipment by malfunction of the

inverter is not covered by the warranty.

Any examination or repair after the warranty period (one-year) is not covered. And within the

warranty period, any repairs and examinations which result in information showing the faults

were caused by any of the items mentioned above, the repair and examination cost are not

covered. If you have any questions regarding the warranty, please contact either your supplier

or the local HYUNDAI Distributor. Please refer to the back cover for a list of the local HYUNDAI

Distributors.

Содержание N5000













































































Результаты поиска

Содержание N5000

Отзывы:

Похожие инструкции для N5000

Бренды по названию

Популярные бренды

Hyundai N5000, Инструкция по эксплуатации

Результаты поиска

Содержание N5000

Отзывы:

Похожие инструкции для N5000

Бренды по названию

Популярные бренды