manualshive.com logo in svg

Hyundai KONA Electric 2020, Руководство пользователя, Страница: 62 / 541

Поделиться
Скачать
Hyundai KONA Electric 2020 Скачать руководство пользователя страница 62

H53

Charge immediately.
Power limited

When the high voltage  battery level
reaches below 3%, this warning
message is displayed.
The warning light on the instrument
cluster (

) and the power down

warning light (

) will turn on simul-

taneously.
The vehicle's power will be reduced
to minimize the energy consumption
of the high voltage battery. Charge
the battery immediately.

Low outside temperature may
limit power output. Charge EV
battery/Low EV battery tempera-
ture. Power limited

[A] : Displays when turning off vehicle.
[B] : Displays when turning on vehicle.

Both warning messages are dis-
played to protect electric vehicle sys-
tem when the outside ambient tem-
perature is low. If the high voltage
battery charging level is low and
parked outside in low temperature for
a long time, vehicle power could be
limited.
Charging the battery before driving
helps increase power.

If this warning message is still dis-
played even after the ambient tem-
perature has increased, have the
vehicle inspected by an author-
ized HYUNDAI dealer.

NOTICE

OOSEV048122L

OOSEV048199N/OOSEV048126N

Содержание KONA Electric 2020






























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов