manualshive.com logo in svg

Hyundai KONA Electric 2020, Руководство пользователя, Страница: 122 / 541

Поделиться
Скачать
Hyundai KONA Electric 2020 Скачать руководство пользователя страница 122

2-44

Safety system of your vehicle

Automatic locking mode   

Since all passenger seat belts move
freely under normal conditions and
only lock under extreme or emer-
gency conditions (emergency locking
mode), you must manually pull the
seat belt all the way out to shift the
retractor to the "Automatic Locking"
mode to secure a child restraint.
The "Automatic Locking" mode will
help prevent the normal movement
of the child in the vehicle from caus-
ing the seat belt to loosen and com-
promise the child restraint system. To
secure a child restraint system, use
the following procedure.

To install a child restraint system on
the rear seats, do the following:
1. Place the child restraint system on

a rear seat and route the lap/
shoulder belt around or through
the child  restraint, following the
restraint manufacturer's instruc-
tions.

When using the rear center seat
belt, you should also refer to the
"Rear Seat Belt – Passenger's 3-
point system" section in this
chapter.

2. Make sure to insert the belt into

the guide (1) and check that the
seat belt is not twisted.

NOTICE

OLMB033044

OOS037030

Содержание KONA Electric 2020






























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов