manualshive.com logo in svg

Hyundai KONA Electric 2020, Руководство пользователя, Страница: 205 / 541

Поделиться
Скачать
Hyundai KONA Electric 2020 Скачать руководство пользователя страница 205

3-58

Convenient features of your vehicle

AUTO HOLD Indicator
Light 

This indicator light illuminates:

• [White] When you activate the auto

hold system by pressing the AUTO
HOLD switch.

• [Green] When you stop the vehicle

completely by depressing the
brake pedal with the auto hold sys-
tem activated.

• [Yellow] When there is a malfunc-

tion with the auto hold system.
If this occurs, have the vehicle
inspected by an authorized
HYUNDAI dealer.

For more details, refer to "Auto
Hold" in chapter 5.

Forward Collision-
Avoidance Assist (FCA)
System Warning Light

This warning light illuminates :

• When the POWER button is in the

ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When the FCA system is turned off.
• When the radar sensor (if

equipped) or cover is blocked with
dirt or snow. Check the sensor and
cover and clean them using a soft
cloth. (Note that some models with
FCA do not incorporate a radar
sensor.)

• When there is a malfunction with

FCA. If this occurs, have your vehi-
cle inspected by an authorized
HYUNDAI dealer.

For more details, refer to "Forward
Collision-Avoidance Assist (FCA)
System" in chapter 5.

Lane Keeping Assist
(LKA) System Indicator
Light

This indicator light illuminates:

• [Green] When the system operat-

ing conditions are satisfied for
LKA.

• [White] When system operating

conditions are not satisfied.

• [Yellow] When there is a malfunc-

tion with the lane keeping assist
system.

If this occurs, have your vehicle
inspected by an authorized HYUNDAI
dealer.

For more details, refer to "Lane
Keeping Assist (LKA) System" in
chapter 5.

Содержание KONA Electric 2020






























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов