Hyundai KONA Electric 2020 Скачать руководство пользователя страница 472

Страница: 472 / 541

7-22

Maintenance

• When you do not use the vehicle

for a long time in a low tempera-
ture area, disconnect the battery
and keep it indoors.

• Always charge the battery fully

to prevent battery case damage
in low temperature areas.

For Best Battery Service

• Keep the battery securely mount-

ed.

• Keep the battery top clean and dry.
• Keep the terminals and connec-

tions clean, tight, and coated with
petroleum jelly or terminal grease.

• Rinse any spilled acid from the bat-

tery immediately with a solution of
water and baking soda.

Battery Recharging

NOTICE

Always follow these instruc-
tions when recharging your
vehicle's battery to avoid the
risk of SERIOUS INJURY or
DEATH from explosions or acid
burns:

•

Before performing mainte-
nance or recharging the bat-
tery, turn off all accessories
and place the POWER button
to the OFF position.

•

Keep all flames, sparks, or
smoking materials away from
the battery.

•

Always work outdoors or in an
area with plenty of ventilation.

•

Wear eye protection when
checking the battery during
charging.

•

The battery must be removed
from the vehicle and placed in
a well ventilated area.

WARNING

OOSEV078035

Содержание KONA Electric 2020






























































































































































































































































































































































































































































































































































Результаты поиска

Содержание KONA Electric 2020

Отзывы:

Hyundai KONA Electric 2020, Руководство пользователя, Страница: 472 / 541

Результаты поиска

Содержание KONA Electric 2020

Отзывы: