Hyundai KONA Electric 2020 Скачать руководство пользователя страница 245

Страница: 245 / 541

3-98

Convenient features of your vehicle

• Do not cover or spill anything on

the sensor (1) located in front of
the instrument panel.

• Do not clean the sensor using a

window cleaner, the cleanser may
leave a light film which could
interfere with sensor operation.

• If your vehicle has window tint

or other types of metallic coat-
ing on the front windshield, the
AUTO headlamp system may not
work properly.

Parking lamp position (

)

The parking lamp, license plate lamp
and instrument panel lamp are turned
ON.

Headlamp position (

)

The headlamp, parking lamp, license
plate lamp and instrument panel lamp
are turned ON.

Information

The POWER button must be in the
ON position to turn on the headlamp.

NOTICE

OOS047405N

OOS047406N

Содержание KONA Electric 2020






























































































































































































































































































































































































































































































































































Результаты поиска

Содержание KONA Electric 2020

Отзывы:

Hyundai KONA Electric 2020, Руководство пользователя, Страница: 245 / 541

Результаты поиска

Содержание KONA Electric 2020

Отзывы: