manualshive.com logo in svg

Hyundai KONA Electric 2020, Руководство пользователя, Страница: 379 / 541

Поделиться
Скачать
Hyundai KONA Electric 2020 Скачать руководство пользователя страница 379

5-78

Driving your vehicle

The color of indicator will
change depending on the
condition of LKA.

- White : Sensor does not detect

lane markers or vehicle
speed is under 64 km/h (40
mph).

- Green : Sensor detects lane mark-

ers and the system is able
to control vehicle steering.

Information 

If the indicator (white) is activated
from the previous ignition cycle, the
system will turn ON without any addi-
tional control. If you press the LKA
switch again, the indicator on the clus-
ter goes off. 

LKA activation

• To see the LKA screen on the LCD

display in the cluster, select  Assist
mode (

). For more information,

refer to "LCD Display Modes" in
chapter 3.

• If vehicle speed is over 64 km/h (40

mph) and the system detects lane
markers, the color changes from
gray to white.

• Both lane markers must be detect-

ed for the system to fully activate.

i

OOSEV058055L

The Lane Keeping Assist (LKA)
system is a system to prevent
the driver from leaving the lane.
However, the driver should not
solely rely on the system but
always check the road condi-
tions when driving.

WARNING  

■

Lane marker 
undetected

■

Lane marker
detected

OOSEV058055L/OOSEV058056N

Содержание KONA Electric 2020






























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов