manualshive.com logo in svg

Hyundai KONA Electric 2020, Руководство пользователя, Страница: 252 / 541

Поделиться
Скачать
Hyundai KONA Electric 2020 Скачать руководство пользователя страница 252

3-105

Con

v

enient f

e

atur

es of y

our v

ehicle

3

Interior lamp

When the interior lamp switch is in
the DOOR position and all doors (and
tailgate) are closed and locked, the
room lamp will come on for 30 sec-
onds if any of the below is performed.
• When the door unlock button is

pressed on the smart key.

• When the button of the outside

door handle is pressed.

At this time, if you press the door lock
or unlock button, the room lamp will
turn off immediately.

Interior Lights

Do not use the interior lights for
extended periods when the vehi-
cle is turned off or the battery will
discharge.

Interior lamp AUTO cut

The interior lamps will automatically
go off approximately 20 minutes after
the vehicle is turned off and the
doors closed. If a door is opened, the
lamp will go off 40 minutes after the
vehicle is turned off. If the doors are
locked by the smart key and the vehi-
cle enters the armed stage of the
theft alarm system, the lamps will go
off five seconds later.

Front lamps

NOTICE

Do not use the interior lights
when driving in the dark. The
interior lights may obscure your
view and cause an accident.

WARNING  

OOS047051

OOSEV048023

■

Type A 

■

Type B

Содержание KONA Electric 2020






























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов