5-46
5-21-25
DTC
Diagnostic Criteria
Application
HCESPN FMI
G
C
W
140
5
(Detection)
(When Pump EPPR Current is more than 10 mA)
10 seconds continuous, Pump EPPR drive current < 0 mA
(Cancellation)
(When Pump EPPR Current is more than 10 mA)
3 seconds continuous, Pump EPPR drive current
³
10 mA
侑
6
(Detection)
10 seconds continuous, Pump EPPR drive current > 1.0A
(Cancellation)
3 seconds continuous, Pump EPPR drive current
£
1.0 A
侑
(Results / Symptoms)
1. Control Function – Pump horse power setting specification difference
(Fuel efficiency/speed specification failure)
(Checking list)
1. CN-75 (#2) – CN-54 (#28) Checking Open/Short
2. CN-75 (#1) – CN-54 (#01) Checking Open/Short
141
5
(Model Parameter) mounting Boom Priority EPPR
(Detection)
(When Boom Priority EPPR Current is more than 10 mA)
10 seconds continuous, Boom Priority EPPR drive current < 0 mA
(Cancellation)
(When Boom Priority EPPR Current is more than 10 mA)
3 seconds continuous, Boom Priority EPPR drive current
³
10 mA
侑
6
(Detection)
10 seconds continuous, Boom Priority EPPR drive current > 1.0 A
(Cancellation)
3 seconds continuous, Boom Priority EPPR drive current
£
1.0 A
侑
(Results / Symptoms)
1. Control Function – Boom first control operation failure
(Checking list)
1. CN-133 (#2) – CN-54 (#34) Checking Open/Short
2. CN-133 (#1) – CN-54 (#04) Checking Open/Short
G : General C : Crawler Type W : Wheel Type
侍#
Some error codes are not applied to this machine.
(SERIAL NO. : #0611-)
Содержание HX140L
