General Specifications
08 09
Starting signal
Abnormality reset
Multispeed selection
2nd function selection
Output stop
Current input selection
Self-protection function at starting
External TRIP contact input
External thermal input
Operation mode selection
Voltage/frequency characteristic
Operation functions
Output signals
Displayed on
control panel
LED Display
Protective and warning functions
Frequency
setting
Analog digital
Operation status
For meter
Operation status
Error details
Display
function
Environ-
ment
Misc.
Operator
International directive compliance
Ambient temperature
Ambient humidity
Storage temperature
Installation area
Altitude and vibration
Control
characteristic
Input
signal
Item
400 V class
200 V class
0 to 5VDC, 0 to 10VDC, 4 to 20 mA, External variable resistor (1 k
Ω
Ω
~2 k
Ω
Ω
,1 W), main unit volume
resistor Input from control panel
Individual selection of forward or reverse run
Used to reset fault output provided when protective function is activated
Up to 16 speeds (each speed can be set between 0 and 400 Hz), speed can be changed during operation
Acceleration/deceleration time, base frequency, maximum frequency, multistage frequency,
torque boost, electronic thermal, control method, motor parameter
Instant shut-off of inverter output (frequency/voltage)
Input selection of frequency setting current signal
Self-protection selection of start signal
Contact input for when stopping the inverter with external terminal
Thermal contact input for when stopping inverter with externally mounted thermal relay
Control panel or external operation transition selection programmable.
V/f control or sensorless vector control method selection programmable.
Multispeed operation, operation mode selection, DC braking, upper/lower frequency setting,
frequency jump operation, PID control, AVR, 2-stage accel./decel., instantaneous power failure
restart operation, electronic thermal, software lock, carrier frequency adjustment,
auto tuning function, RS485 link operation, starting frequency adjustment, jogging operation, retry
function, automatic torque boost function, usp function, second control function.
Inverter running, frequency reached, frequency detection, overload warning fault
Output frequency, output current, output voltage
Output frequency, output current, output voltage, operation direction, PID feedback, terminal input,
terminal output, transition frequency monitor, power consumption, operating time accumulation
-10
℃
℃
~50
℃
℃
(no freezing)
90%RH or less ( non-condensing)
-20
℃
℃
~60
℃
℃
Indoors without corrosive gases, flammable gases, oil mist or dust
Maximum 1,000 m or less above sea level, 5.9 m/s
2
or less
Fault list, fault history
Standard operator built-in control panel, optional remote operator
UL/CE directive compliance (to be scheduled)
Overcurrent shut-off, regenerative overvoltage shut-off, undervoltage, output short circuit,
temperature abnormality, overload shut-off (electronic thermal), ground fault protection,
external trip, communication error, USP error, EEPROM error
Power on (POWER), operational state (RUN), PRG, frequency (Hz), output current (A), RUN terminal, MIN/MAX volume terminal
N100
plus
004SF 007SF 015SF 004LF 007LF 015LF 022LF 037LF 004HF 007HF 015HF 022HF 037HF
Содержание hiRUN N100-004HF
Страница 1: ...HEAVY INDUSTRIES CO LTD ...
Страница 2: ...We build a better future ...
Страница 4: ...HYUNDAI INVERTER N100plus ...