Hyundai 20G-7, Руководство по обслуживанию

Страница: 329 / 420

MAIN MOVING SYSTEM
2-46
5. Install the bearing cap and tighten the cap bolt to the speci-
fied torque from the center in order.
(Tighten the bearing cap bolts to the specified torque by
tightening bolts step by step 2-3 times equally)
Main bearing cap bolt
Connecting rod cap bolt
2.7 ~ 3.3kg · m+(60° ~ 65° )
5.0 ~ 5.3kg · m
When installing the cap, proper number of cap should be
installed as well as arrow mark should be directed to the
engine crank pulley.
L4GC074A
L4GC075A
L4GC076A
6. Check that the crankshaft for free rotation and proper clear-
ance between the center main bearing thrust flange and
connecting rod big-end bearing.
7. Using the special tool Crankshaft oil seal installer (09231-
21000) , fully insert the oil seal into the crankshaft rear oil
seal case.
Crankshaft end-play 0.06 ~ 0.260mm
8. Install the rear oil seal case and gasket and tighten 5 bolts.
When installing, apply engine oil to the oil seal round and
crankshaft.
9. Install the rear plate.
10. Install the flywheel, front case, oil pan, and timing belt train.
09231 - 21000