Hyundai 20G-7, Руководство по обслуживанию

Страница: 273 / 420

1-2
SAFETY NOTICE
1. REMOVING AND DISASSEMBLING
After finding the malfunctioning reason and determining the
removal and disassembly if necessary, simultaneously with
checking the defect parts, start the job as the instruction of
the shop manual.
To prevent mal-assembly and to ease job, put punch marks
or identification marks on the places where not affect nor-
mal function and exterior.
Arrange multi-piece parts and similar parts in order when
disassembling not to make a mistake while reassembling.
1) Arrange the removed parts in order.
2) Sort replacement parts and re-use parts
3) When replacing bolts and nuts, necessarily use the
specified standard parts.
GENERAL
3. REPLACEMENT PARTS
The following parts should be replaced with new parts after
removing.
1) Oil seal
2) Gasket (except the locker cover gasket)
3) Packing
4) O-ring
5) Locker washer
6) Split pin
L4GC202A
L4GC203A
L4GC201A
2. SPECIAL TOOL
Necessarily use the special tool as instruction to prevent
parts from damage as result of using other general tool.