manualshive.com logo in svg

Hyundai 2004 Elantra, Руководство пользователя

Владельцам Hyundai 2004 Elantra наш сайт предлагает бесплатное скачивание руководства по эксплуатации. Здесь вы найдете все необходимые инструкции и рекомендации по уходу за вашим автомобилем. Скачайте свой мануал с нашего сайта manualshive.com и всегда оставайтесь в курсе всех деталей вашего Hyundai Elantra 2004 года.

Поделиться
Скачать
background image

2

DRIVING YOUR HYUNDAI

13

DRIVING FOR ECONOMY

C140A01A-AAT

You can save fuel and get more miles from your
car if you follow these suggestions:

o Drive smoothly. Accelerate at a moderate

rate. Don't make "jack-rabbit" starts or full-
throttle shifts and maintain a steady cruising
speed. Don't race between stoplights. Try to
adjust your speed to that of the other traffic
so you don't have to change speeds unnec-
essarily. Avoid heavy traffic whenever pos-
sible. Always maintain a safe distance from
other vehicles so you can avoid unneces-
sary braking. This also reduces brake wear.

o Drive at a moderate speed. The faster you

drive, the more fuel your car uses. Driving at
a moderate speed, especially on the high-
way, is one of the most effective ways to
reduce fuel consumption.

o Don't "ride" the brake or clutch pedal. This

can increase fuel consumption and also
increase wear on these components. In
addition, driving with your foot resting on the
brake pedal may cause the brakes to over-
heat, which reduces their effectiveness and
may lead to more serious consequences.

o Take care of your tires. Keep them inflated

to the recommended pressure. Incorrect
inflation, either too much or too little, results
in unnecessary tire wear. Check the tire
pressures at least once a month.

C310B01O-AAT

TCS ON/OFF Mode

When the TCS is running, the TCS indicator in
the instrument cluster will blink.
If you turn the system off by pressing the TCS
switch, the TCS-OFF indicator will come on and
stay on. In the TCS-OFF mode, the SLIP control
will be deactivated. Adjust you driving accord-
ingly. To turn the system back on, press the
switch again. The TCS-OFF indicator should go
off.

NOTE:

1) The TCS mode will automatically be

turned ON after the engine is turned off
and restarted.

2) When the traction control system is

operating properly, you can feel a slight
pulsation in the vehicle. This is only the
effect of brake control and indicates
nothing unusual.

3) When the engine starts, a click is heard

from the engine compartment; however,
this is only the sound of traction control
being checked.

4) When moving out of the mud or fresh

snow, pressing the accelerator pedal
may not cause the engine speed to in-
crease due to TCS operation.

C310D01O-AAT

Indicators and Warning

The indicators should illuminate when the igni-
tion key is turned to ON or START but should
go out after three seconds.
If the indicators do not illuminate, or the TCS or
TCS-OFF indicator does not go out after 3
seconds, have it checked by an authorized
dealer.

Should there be any unusual conditions in the
device while driving, TCS-OFF indicator illumi-
nates as a warning.
If TCS-OFF indicator illuminates, pull your car
to a safe place and stop the engine.
Then, start the engine again to check if the TCS-
OFF indicator goes out.

If the indicator remains lit even after the engine
has been started, have your car checked by an
authorized Hyundai dealer.

NOTE:

1) When the TCS-OFF indicator illuminates,

traction control is automatically deacti-
vated for safety.

2) This warning function is not provided

when the driver selects the TCS-OFF
mode.

Содержание 2004 Elantra


















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2004 Elantra

Jabra SP200 - QUICKSTART GUIDE 1 Quick Start Manual preview
SP200 - QUICKSTART GUIDE 1
Бренд: Jabra Страницы: 2
Jabra BT150 - Headset - Over-the-ear Quick Start Manual preview
BT150 - Headset - Over-the-ear
Бренд: Jabra Страницы: 2
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Бренд: FORM FIT Страницы: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Бренд: Thule Страницы: 12
DriveRight 8156OBD Installation Manual preview
8156OBD
Бренд: DriveRight Страницы: 16
Air Lift 88365 Installation Manual preview
88365
Бренд: Air Lift Страницы: 28
Dolphin DAS400 Owner'S Manual preview
DAS400
Бренд: Dolphin Страницы: 16
HAKR TRIP 3 Instructions For Use Manual preview
TRIP 3
Бренд: HAKR Страницы: 9
Webasto H300 comfort Operating Instructions Manual preview
H300 comfort
Бренд: Webasto Страницы: 44
Phonocell 6/821 Mounting Instructions preview
6/821
Бренд: Phonocell Страницы: 8
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Бренд: Dodge Страницы: 484
AA Products KX205 Instruction Manual preview
KX205
Бренд: AA Products Страницы: 8
Maxon 299018-01 Instruction preview
299018-01
Бренд: Maxon Страницы: 10
Webasto Thermo Top E Installation Documentation preview
Thermo Top E
Бренд: Webasto Страницы: 28
Air Lift AirCELL 52205 Installation Manual preview
AirCELL 52205
Бренд: Air Lift Страницы: 12
Kleinn Air Horns GMTRK-3 Install Manual preview
GMTRK-3
Бренд: Kleinn Air Horns Страницы: 38
ikross IKHD74 User Manual preview
IKHD74
Бренд: ikross Страницы: 2
MSD Ignition 2351 Installation Instructions preview
2351
Бренд: MSD Ignition Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды