manualshive.com logo in svg

Hyundai 2004 Elantra, Руководство пользователя, Страница: 203 / 241

Поделиться
Скачать
Hyundai 2004 Elantra Скачать руководство пользователя страница 203

6

DO-IT-YOURSELF MAINTENANCE

19

G150A02E

CHECKING THE FREEPLAY

G160A01A-AAT

Clutch Pedal

With the engine off, press lightly on the clutch
pedal until you feel a change in resistance. This
is the clutch pedal free-play. The free-play
should be within the limits specified in the illus-
tration. If it is not, have it inspected by your
Hyundai dealer and adjusted or repaired if
necessary.

G160A01E

0.24 ~ 0.51 in.
(6 ~ 13 mm)

G150A01A-AAT

Steering wheel

To check the steering wheel free-play, stop the
car with the wheels pointed straight ahead and
gently move the steering wheel back and forth.
Use very light finger pressure and be sensitive
to changes in resistance that mark the limits of
the free-play. If the free-play is greater than
specified, have it inspected by your Hyundai
dealer and adjusted or repaired if necessary.

1.18 in.
(30 mm)

4. Replace the air filter with a new one.
5. Installation is the reverse order of disassem-

bly.

!

3. Remove the filter cover by pushing the two

hooks of the filter cover.

CAUTION:

Be sure to install the air filter in the direction
of the arrow sign. Otherwise, it may cause
noise or deterioration.

HXD2099

Содержание 2004 Elantra


















































































































































































































































Отзывы:

Нет отзывов