manualshive.com logo in svg

Hyundai 2004 Elantra, Руководство пользователя, Страница: 59 / 241

Поделиться
Скачать
Hyundai 2004 Elantra Скачать руководство пользователя страница 59

1

FEATURES OF YOUR HYUNDAI

48

INSTRUMENT CLUSTER

B270A01A-AAT

BRAKE   PAD  WEAR WARNING   SOUND

The front disc brake pads have wear indicators
that should make a high-pitched squealing or
scraping noise when new pads are needed. The
sound may come and go or be heard all the time
when the vehicle is moving. It may also be heard
when the brake pedal is pushed down firmly.
Expensive rotor damage will result if the worn
pads are not replaced. See your Hyundai dealer
immediately.

B260A01B-GAT

Front Fog Indicator Light
(If Installed)

Front fog indicator light comes on whenever the
fog light switch is on.

B260N01A-AAT

Malfunction Indicator Light

This light illuminates when there is a malfunction
of an exhaust gas related component, and the
system is not functioning properly so that the
exhaust gas regulation values are not satisfied.
This light will also illuminate when the ignition key
is turned to the "ON" position, and will go out in
a few seconds. If it illuminates while driving, or
does not illuminate when the ignition key is
turned to the "ON" position, take your car to your
nearest authorized Hyundai dealer and have
the system checked.

B260R01E-GAT

Set Indicator Light

(

(If installed)

The set indicator light in the instrument cluster
is illuminated when the cruise control switch is
pushed downward to "SET (COAST)".
The set indicator light does not illuminate when
the control switch is "CANCEL" position.

B265C01O-AAT

Traction Control
Indicator Lights
(If installed)

The traction control indicators change opera-
tion according to the ignition switch position and
whether  the system is in operation or not.
They will illuminate when the ignition key is
turned to the "ON" position, but should go out
after three seconds. If the TCS or TCS-OFF
indicator stays on, take your car to your autho-
rized Hyundai dealer and have the system
checked. See section 2 for more information
about the TCS.

B280A01A-AAT

FUEL GAUGE

The needle on the gauge indicates the approxi-
mate fuel level in the fuel tank. The fuel capacity
is given in Section 9.

Without Trip Computer

With Trip Computer

HXDFL291

HXDFL284

Содержание 2004 Elantra


















































































































































































































































Отзывы:

Нет отзывов