manualshive.com logo in svg

Hyundai 2004 Elantra, Руководство пользователя

Владельцам Hyundai 2004 Elantra наш сайт предлагает бесплатное скачивание руководства по эксплуатации. Здесь вы найдете все необходимые инструкции и рекомендации по уходу за вашим автомобилем. Скачайте свой мануал с нашего сайта manualshive.com и всегда оставайтесь в курсе всех деталей вашего Hyundai Elantra 2004 года.

Поделиться
Скачать
background image

3

WHAT TO DO IN AN EMERGENCY

4

IF THE ENGINE OVERHEATS

!

!

WARNING:

While the engine is running, keep hair,
hands, and clothing away from moving
parts such as the fan and drive belts to
prevent injury.

5. If the water pump drive belt is broken or

engine coolant is leaking out, stop the engine
immediately and call the nearest Hyundai
dealer for assistance.

WARNING:

Do not remove the radiator cap when the
engine is hot. This can allow coolant to be
blown out of the opening and cause seri-
ous burns.

6. If you cannot find the cause of the overheat-

ing, wait until the engine temperature has
returned to normal. Then, if coolant has been
lost, carefully add coolant to the reservoir
(page 6-9) to bring the fluid level in the
reservoir up to the halfway mark.

7. Proceed with caution, keeping alert for  fur-

ther signs of overheating. If overheating
happens again, call a Hyundai dealer for
assistance.

D030A01A-AAT

If your temperature gauge indicates overheat-
ing, you experience a loss of power, or hear loud
pinging or knocking and the engine is probably
too hot. If this happens and, you should:

1. Pull off the road and stop as soon as it is safe

to do so.

2. Place the gear selector lever in "P" (auto-

matic), or neutral (manual transaxle) and set
the parking brake. If the air conditioning  is on,
turn it off.

3. If engine coolant is running out under the car

or  steam is coming out from the hood, stop
the engine. Do not open the hood until the
engine coolant has stopped running or the
steaming has stopped. If there is no visible
loss of engine coolant and no steam, leave
the engine running and check to be sure the
engine cooling fan is operating.  If the fan is
not running, turn the engine off.

4. Check to see if the water pump drive belt is

missing. If it is not missing, check to see that
it is tight. If the drive belt seems to be
satisfactory, check for engine coolant leak-
ing from the radiator, hoses or under the car.
(If the air conditioning had been in use, it is
normal for cold water to be draining from it
when you stop).

post or cable of the booster battery. Then
attach the other end of that cable to a solid
metal part of the engine  away from the
battery. Do not connect the cable to any
moving part.

4. Start the engine in the car with the booster

battery and let it run for a few minutes. This
will help to assure that the booster battery is
fully charged. During the jumping operation,
run the engine in this vehicle at about 2,000
rpm.

5. Start the engine in the car with the dis-

charged battery using the normal starting
procedure. After the engine starts, leave the
jumper cables connected and let the engine
run at fast idle or about 2,000 rpm for several
minutes.

6. Carefully remove the jumper cables in the

reverse order of attachment.

If you do not know why your battery became
discharged (because the lights were left on,
etc.), have the charging system checked by
your Hyundai dealer.

Содержание 2004 Elantra


















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2004 Elantra

Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Бренд: Streetwize Страницы: 20
Chariot Carriers 51100913 Instruction Manual preview
51100913
Бренд: Chariot Carriers Страницы: 3
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Бренд: Havis-Shields Страницы: 3
P-Invent Troller User Manual preview
Troller
Бренд: P-Invent Страницы: 4
Tachosys digidl Installation Manual preview
digidl
Бренд: Tachosys Страницы: 28
Whispbar K684W Fitting Instructions Manual preview
K684W
Бренд: Whispbar Страницы: 15
Meritor 93000 Service Service Manual preview
93000 Service
Бренд: Meritor Страницы: 20
Stealthbox SB-J-GCHER2/10W3v2 Installation Manual preview
SB-J-GCHER2/10W3v2
Бренд: Stealthbox Страницы: 2
Rugged Ridge 13551.33 Manual preview
13551.33
Бренд: Rugged Ridge Страницы: 3
Scosche VQ2M Manual preview
VQ2M
Бренд: Scosche Страницы: 32
Honda 2001 CR-V Owner'S Manual preview
2001 CR-V
Бренд: Honda Страницы: 326
Yakima K1043 Manual preview
K1043
Бренд: Yakima Страницы: 10
Baseus CRJS01 User Manual preview
CRJS01
Бренд: Baseus Страницы: 5
SMART cabriolet Maintenance Booklet preview
cabriolet
Бренд: SMART Страницы: 26
Kia Carnival Manual preview
Carnival
Бренд: Kia Страницы: 828
Nokia CK-600 Product Sheet preview
CK-600
Бренд: Nokia Страницы: 2
Nokia CR-200 User Manual preview
CR-200
Бренд: Nokia Страницы: 12
Nokia HF-33W - Wireless Plug-in Car Handsfree Manual preview
HF-33W - Wireless Plug-in Car Handsfree
Бренд: Nokia Страницы: 38

Бренды по названию

Популярные бренды

Загрузить еще бренды