manualshive.com logo in svg

Hyundai 2004 Elantra, Руководство пользователя, Страница: 211 / 241

Поделиться
Скачать
Hyundai 2004 Elantra Скачать руководство пользователя страница 211

6

DO-IT-YOURSELF MAINTENANCE

27

!

WARNING:

This halogen bulb contains gas under pres-
sure and if impacted could shatter, result-
ing in flying fragments. Always wear eye
protection when servicing the bulb. Protect
the bulb against abrasions or scratches
and against liquids when lighted. Turn the
bulb on only when installing in a headlight.
Replace the headlight if damaged or cracked.
Keep the bulb out of the reach of children
and dispose of the used bulb with care.

8. Remove the protective cap from the re-

placement bulb and install the new bulb by
matching the plastic base with the headlight
hole. Retighten the bulb spring and recon-
nect the power cord.

9. Use the protective cap and carton to prompt-

ly dispose of the old bulb.

10. Check for proper headlight aim.

(1) High beam
(2) Low beam
(3) Front turn signal light

7. Push the bulb spring to remove the headlight

bulb.

6. Turn the plastic cover counterclockwise

and remove it.

HXDFL1011

HXDFL1010

HXDFL1013-1

(1)

(2)

(3)

G270A03O

Содержание 2004 Elantra


















































































































































































































































Отзывы:

Нет отзывов