background image

General Safety

  6

      WARNING : READ THE INSTRUCTION BOOKLET THOROUGHLY BEFORE 
USING THE MACHINE. Keep for future reference and pass it on if the machine 
is loaned or sold to another user.

!

 

WARNING!

 You must read these 

instructions carefully before operating the 
machine. Make sure that you are familiar with 
the controls and properly operate the 
machine. You must learn how to stop the 
machine quickly. If you do not follow the 
warnings and instructions, it may result in fire 
and/or serious injury. Make sure to save all 
warnings and instructions for future reference.

• 

Read this manual and labels affixed to the

machine, battery and dock station to 
understand its limitations and potential 
hazards.

• 

Be thoroughly familiar with the controls and

their proper operation. Know how to stop the
machine and disengage the controls quickly.

• 

If the unit is to be used by someone other 

than original purchaser, or is to be loaned, 
rented, or sold, always provide this manual 
and any needed safety training before 
operation. The user can prevent and is 
responsible for accidents or injuries that may 
occur to themselves, to other people, or to 
property.

• 

Do not force the machine beyond its limits.

Use the correct machine for your application.

• 

Know how to stop the machine quickly in 

case of emergency. Understand the use of all 
controls.

• 

ALL MAINTENANCE other than that listed in 

this manual, should be carried out by 
professionally trained and certified personnel.

    Understand Your Machine

    Personal Safety

• WARNING! 

Never allow children or people 

unfamiliar with these instructions to use the 
product. Local regulations can restrict the 
minimum age of the operator. 

• 

Keep children, pets, and other people not

using the unit away from the work area. Be
alert and shut off the unit if anyone enters
the work area. Keep children under the
watchful care of a responsible adult.

• 

Stay alert, watch what you are doing and 

use common sense when operating the 
machine. Never operate the machine when 
unwell or tired, or if you have taken alcohol, 
medicine, drugs or any substances which may 
slow your reflexes and compromise 
judgement. A moment of inattention while 
operating the machine may result in serious 
personal injury.

• 

Appropriate Personal Protective Equipment 

(PPE), 

MUST

 be worn at all times when 

operating or repairing the machine. Always 
wear anti-slip and resistant work footwear and 
long trousers while using the machine. Do not 
use the machine when barefoot, wearing 
sandals or similar lightweight footwear. Do not 
wear chains, bracelets or clothing that is loose 
fitting or hanging ties or cords. Tie long hair 
back. Always wear protective earplugs. Loose 
clothes, jewellery, or long hair can be caught 
in moving parts. Protect eyes, face, and head 
from objects that may be thrown from the unit. 
Always wear safety goggles or safety glasses 
with side shields when operating.
 

• 

Always keep hands and feet away from all

moving parts during operation. Moving parts
can cut or crush body parts.

!

!

Содержание HYRM1000

















































Отзывы: