Hyundai power products HYRM1000, Инструкция по эксплуатации

Страница: 19 / 48

19
Assembly
Preparations
STEP 1
If the grass in the proposed working area is
taller than 10cm, please mow it using a
traditional lawnmower. Then collect the
clippings.
STEP 2
Check that all parts for the installation are
included:
1. Operator’s manual
2. Machine
3. Dock station
4. The boundary wire
5. Screws
6. Installation ruler
7. Power a
dapter
8. Pegs for boundary wire
9. You will also need a hammer for the pegs,
a straight spade for burying wire and nails.
These items are not included.
Dock Station Installation
STEP 1
Select position of the dock station.
STEP 2
The dock station must be positioned with free
space in front of it (minimum 2m).
STEP 3
The dock station must be positioned on
relatively level ground. The front end of the
dock station must not be positioned higher
than the back end. The height difference must
not be more than 2cm.
STEP 4
It is a good idea to place the dock station
in the shade. The battery is spared if it is
charged in the lowest possible ambient
temperature.
STEP 5
The dock station must not be positioned in a
way that can bend its base plate.
1
2 3
4 5
6
7 8
9
More than 2m
Before installation, we recommend doing a
sketch of the working area, including all
obstacles. This makes it easier to see the ideal
positions for the dock station and boundary
wire.