manualshive.com logo in svg

HYT TM-800 UHF, Руководство пользователя, Страница: 30 / 50

Поделиться
Скачать
HYT TM-800 UHF Скачать руководство пользователя страница 30

 30 
 

 

normal user mode. 

2.

  In PA mode, no transmission and reception occurs.   

3.

  Hold down the [PTT] key and speak into the microphone, your voice can be heard 

from the external speaker that is connected to the radio. “PA On” appears on the LCD 

display. 

4.

  Release the [PTT] key, the public address process halts and “PA” appears on the 

LCD display.   

Notes:  

●

 In Public Address mode, turn the volume knob to adjust the volume.   

●

 To use this function, the dealer should install public address optional accessory and 

external speaker. 

 

Dual Home Channels 

Press the key programmed as [Home CH], the radio will go to the programmed home 

channel. 

When dual home channels are set, press the key programmed as [Home CH] to switch to 

Home Channel 1, press again to switch to Home Channel 2, and press for the third time 

to return to the original channel.   

 

Horn Alert 

1. Press the key programmed as [HA] to activate Horn Alert function, “HA” appears on the 

LCD display.   

2. The radio’s accessory ports HRI and HRO is connected when receiving calls of the 

matching 2-Tone/5-Tone/DTMF

/

HDC2400

TM

 code from the base station or other 

radios.  

3. Press the [HA] key again to exit from the Horn Alert mode. 

Note: 

This function is especially helpful when user is away from the radio. It can be used to 

control the electronic devices over the air. 

Selectable Two-Tone Encode   

1.

  Press the key programmed as [TTS], the programmed 2-Tone code or name will be 

displayed on the LCD. 

2.

  Turn the selector knob to select 2-Tone code (01-32) or name. 

3.

  Hold down the [PTT] key to transmit the selected code. 

4.

  Release the [PTT] key

,

 signalling squelch turns off and radio LED flashes orange.   

Содержание TM-800 UHF



















































Отзывы:

Нет отзывов