manualshive.com logo in svg

HYT TM-800 UHF, Руководство пользователя, Страница: 20 / 50

Поделиться
Скачать
HYT TM-800 UHF Скачать руководство пользователя страница 20

 20 
 

 

Signal (for DTMF type only). 

 

 

Channel Scan 

▇

 Scan Types 

●

 Single Zone Scan 

All channels in the current zone that have been added to the scan list can be scanned.   

●

 Multi Zone Scan 

All channels within all the zones that have been added to the scan list can be scanned.   

●

 List Zone Scan 

The radio only scans the channels within the specified range of zones that have been 

added to the scan list. Individually each zone is assigned with a scan list, which provides 

quick recognition of the zones to be locked out of scan list.   

Note: Scan list for each zone can be added/ deleted. 

 

▇

 Scan Start 

Press the key programmed as [SCN], scan starts from the current channel and ascends 

through the channel numbers in scan list. “SCAN” appears on the LCD (

“

-SCAN X -

”

 in 

List Zone Scan mode002C “X” is the current list number). 

Note: Scan function can be used only when two or more channels are in the scan list. 

 

▇

 Scan Stop 

1.

  Press the [SCN] key again to stop scanning. “SCAN” disappears on the LCD. 

2.

  Activate the Monitor function. 

3.

  Carrier is detected on channels where no signalling is set. 

4.

  Carrier is detected on channels where signalling is set, and the matching signalling is 

received. 

 

 

▇

 Scan Restart 

When the radio stops on a busy channel, scanning can be restarted according to the 

restart mode, which can be programmed by the dealer as carrier-operated scan or 

time-operated scan. 

●

 Carrier Operated Scan 

Содержание TM-800 UHF



















































Отзывы:

Нет отзывов