HYT TM-800 UHF Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 50

HYT TM-800 UHF Скачать руководство пользователя страница 22

22

▇

Look Back Temporary Disable

When scanning looks back and stops on a priority channel, press the key programmed as

[Add/Del] to deactivate the Look Back function.

▇

Nuisance Channel Temporary Delete

This feature allows you to temporarily

delete

a channel to/from the scan list during

scanning.

When scanning stops on an undesired channel (e.g. nuisance channel), press the key

programmed as [Add/Del], the channel is temporarily removed from the scan list and

scanning resumes.

Note: The

deletion

of channels are not saved when radio exits from the scan mode.

▇

Revert Channel

Press the [PTT] key during scanning, the radio will stop scanning and switch to the preset

revert channel (programmed by your dealer) for transmission.

▇

Off Hook Scan

If your dealer has programmed Off Hook Scan feature, scanning is not controlled by

microphone hook status, it also means that the radio always scans, and stops by signal

presence. Otherwise, microphone must be on hook for scanning.

Busy Channel Lockout (BCL)

When activated by your dealer, the BCL feature will prevent you from talking on a channel

that is already in use. Press the [PTT]

key

while the channel is in use, the radio will emit

an alert tone and transmission will be inhibited. Release the [PTT] key to stop the alert

tone. Wait until the channel is not in use before you try to transmit again.

BCL Override

If BCL Override feature is activated, you can override the BCL feature and transmit on a

busy channel. To override the BCL, release the [PTT] key when the alert tone sounds,

then press the [PTT] key again within 0.5 second.

«
...
20
21
22
23
24
...
»

Содержание TM-800 UHF



















































Отзывы:

Нет отзывов