HYT TM-800 UHF Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 50

HYT TM-800 UHF Скачать руководство пользователя страница 17

17

Basic Operations

Turn the Radio On/Off

Press the Power switch to switch the radio on.

Press and hold the Power switch for approximately 1 second to switch the radio off.

If Power on Password is set to protect your radio, “Chk P” and the cursor will appear on

the display when power is turned on. You can unlock the radio by entering the correct

password (8 digits maximum):

1. Select a digit (0-9) by rotating the selector knob.

If you are using an optional microphone with a keypad, you can also enter the

password by pressing the appropriate keypad keys.

2. Press the [PF3] / [PF4] key to move cursor forward and backward.

This step can be skipped when using the keypad.

3. Repeat steps 1 and 2 to enter the entire password.

4. Press the [PF6] key or the [PTT] key to complete the entry.

Adjust the Volume

Selector Knob, [

▲

] / [

▼

] or the function keys PF1-PF6 can be programmed with VOL Up /

VOL Down features to adjust volume level.

Rotate the Selector Knob clockwise or press the key which be programmed as [VOL Up]

key to increase the volume; rotate the knob counter-clockwise or press the key which be

programmed as [VOL Down] key to decrease the volume. The current volume level is

displayed on the LCD. The LCD returns to original display mode in 5 seconds. Press any

key to exit from the volume level display mode.

Monitor

If monitor feature is set by your dealer, press the key programmed as [MONI] in receive

mode to monitor activity on your selected channel.

Your dealer can select one of the following four modes for monitor feature:

z

Monitor

Unmute-Momentary

Hold down the [MONI] key to open CTCSS/CDCSS/DTMF/2-Tone/5-Tone signalling

squelch. Release to close the signalling squelch.

«
...
15
16
17
18
19
...
»

Содержание TM-800 UHF



















































Отзывы:

Нет отзывов